USB Device Registry Entries

Find device information after it enumerates on Windows

View the device interface GUID, Hardware Id, and device class information about your device

Find this registry key and note the DeviceInstance value:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceClasses\

Find the device instance registry key and get the device interface GUID:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\<hardware id>\<instance id>\Device Parameters

Under the device instance key, note the device class, subclass, and protocol codes:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB

Registry settings for configuring USB driver stack behavior

The registry entries described in this topic are found under this key:

C++Copy

HKEY_LOCAL_MACHINE SYSTEM CurrentControlSet Control usbflags <VVVVPPPPRRRR> <Device-specific registry entry>

In the vvvvpppprrrrr key,

vvvv is a 4-digit hexadecimal number that identifies the vendorpppp is a 4-digit hexadecimal number that identifies the productrrrr is a 4-digit hexadecimal number that contains the revision number of the device.

The vendor ID, product ID, and revision number values are obtained from the USB device descriptor. The following table describes the possible registry entries for the vvvvpppprrrrr key. The USB driver stack considers these entries as read-only values.

TABLE 1 Registry entryDescriptionPossible values

osvc

REG_BINARY

Supported on Windows XP and later versions.

Indicates whether the operating system queried the device for Microsoft-Defined USB Descriptors. If the previously-attempted OS descriptor query was successful, the value contains the vendor code from the OS string descriptor.

0x0000: The device did not provide a valid response to the Microsoft OS string descriptor request.

0x01xx: The device provided a valid response to the Microsoft OS string descriptor request, where xx is the bVendorCode contained in the response.

IgnoreHWSerNum

REG_BINARY

Supported on Windows Vista and later versions.

Indicates whether the USB driver stack must ignore the serial number of the device.

0x00: The setting is disabled.

0x01: Forces the USB driver stack to ignore the serial number of the device. Therefore, the device instance is tied to the port to which the device is attached.

ResetOnResume

REG_BINARY

Supported on Windows Vista and later versions.

Indicates whether the USB driver stack must reset the device when the port resumes from a sleep cycle.

0x0000: The setting is disabled.

0x0001: Forces the USB driver stack to reset a device on port resume.

 

 

https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-device-specific-registry-settings